Main characteristics
Overall length: 15m95
Overall Beam: 6m70
Depth: 2m96
Rear draft: 2m88
Fish hold capacity: 25m³
Fuel oil capacity: 11m³ + daily tank
Crew on board: 5+1
Propulsion: 450cv x 1800tr/mn engine & gearbox Engine Baudouin
Cruising speed: 9 à 10 knots
Trawling speed: 3 à 4 knots
Bollard pull: 6 t.
Navigation category: 2nd
Construction: under survey Bureau Véritas
Design office: Bernard Naval Shipyards S. A.
Specifications
The fishing boat is a « Trawler – shellfish » fishing vessel with a shelter deck, for trawling in the Channel and the North Atlantic Ocean, during day and night trips, in accordance with the program and indications provided by the skipper owner.
The fishing boat makes sea trips in one or more times. Fisheries catches are carried on deck and stored in the refrigerated fish hold.
The construction of this ship is studied from sister-ships « L'Amarante » and « Le Tourville ».
The trawler is a two-deck fishing vessel (main deck and upper deck), with a central passageway.
The freeboard deck is the main deck.
The wheelhouse is located on the upper deck.
4 watertight bulkheads under the freeboard deck.
Propulsion is provided by a diesel engine driving a fixed pitch propeller under in a nozzle via a gear box.
The fishing boat is equipped with « towed» type fishing gears: 3 hydraulic Bopp winches on the aft deck, 4 hydraulic net Bopp + 2 Bopp gilsons.
The trawler is suitable for the following fisheries: bottom trawling - pelagic trawling only - pelagic trawling in twin trawls with central warp cable – scallopdredging with 2 sticks of 7 dredges.
Handling trawls on board is made from 2 gilsons.
Fished products landing is carried out from an unloading mast.
The « Trawler – shellfish » fishing boat is a fishing vessel with a shaped hull with anti-roll keel, plus an inclined bow and a semi-submerged bulbous bow and inclined boat transom.
The hull, entirely built in GRP fiberglass, is a monolithic polyester construction. Complete action of the vacuum of the hull was made by hand.
The decks and bulkheads and wheelhouse are in polyester sandwich construction.
The hull fittings are indo 316L steel.
The outer railings are made of aluminium tube.
The fishing gantry is made of aluminium.
The insulated fish hold is subdivided and refrigerated at 2°C.
Sanitary: cold & hot water with toilet.
Electrical equipment in 24Vdc and 230Vac on inverter.
Equipment for navigation and radio: depth sounder, radar, GPS, autopilot, compass, VHF, AIS, PC turbo, engines surveillance camera.
Fire security and detection installation.
Thermal and sound insulating of living spaces.
Accommodation: Galley – Lazarette – Cabin skipper - Crew's accommodation - Fishing Store - Fish hold – Berthe’s crew accommodation.